1 2 2 2 2 3 4 4 4 5 6 list list................................................................................................. package outline............................................................................... features.......................................................................................... maximum ratings .............................................................................. rating and characteristic curves........................................................ pinning information........................................................................... marking........................................................................................... tube packing.................................................................................... suggested thermal profiles for soldering processes............................. high reliability test capabilities........................................................... mechanical data............................................................................... page 1 formosa ms http://www.formosams.com/ tel:886-2-22696661 fax:886-2-22696141 document id issued date revised date revision page. ds-222529 2009/08/10 2015/07/06 d 6 ef1005fct thru ef1060fct effciency fast rectifiers
package outline page 2 high current capability features . low reverse leakage current high surge capability. glass passivated chip junction. lead-free parts meet rohs requirments. ? ? . suffix "-h" indicates halogen free parts, ex. f1005fc-h. ? ? ? ? ? ? ? ? reverse recovery time less than 25ns dual rectifier construction, positive centetap, offers 5.0a half wave and10.0a full wave rectification. low forward drop down voltage. high reliability. formosa ms 10.0a glass passivated effcienct fast rectifiers-50-600v http://www.formosams.com/ tel:886-2-22696661 fax:886-2-22696141 document id issued date revised date revision page. ef1005fct thru ef1060fct dimensions in inches and (millimeters) ito-220ab 0.406(10.3) 0.381(9.7) 0.134(3.4) 0.118(3.0) 0.606(15.4) 0.583(14.8) 0.272(6.9) 0.248(6.3) 1 2 3 0.161(4.1)max 0.548(13.9) 0.189(4.8) 0.165(4.2) 0.028(0.7) 0.019(0.50) 0.1(2.55) pin 1 pin 3 pin 2 0.130(3.3) 0.099(2.5) 0.032(0.8)max 0.512(13.0) mechanical data epoxy : ul94-v0 rated flame retardant ? ? ? ? ? ? case : jedec ito-220ab molded plastic body over passivated chip lead : axial leads, solderable per mil-std-202, method 208 guranteed polarity: mounting position : any weight : approximated 1.70 gram as marked effciency fast rectifiers maximum ratings (at t =25 a o c unless otherwise noted) maximum repetitive peak reverse voltage maximum rms voltage peak forward surge current 8.3ms single half sine-wave(jedec method) maximum dc blocking voltage maximum average forward rectified current operating junction temperature range storage temperature range maximum forward voltage at if=5.0a per leg maximum dc reverse current at tj =25 c at tj =125 c at rated dc blocking voltage per leg electrical characteristics (at t =25 a o c unless otherwise noted) thermal characteristics maximum reverse recovery time (note 2) per leg typical thermal resistance junction to case per leg parameter parameter parameter symbols symbols symbols v dc v rrm i fsm v rms t stg i o t j v f i r r jc trr ef1005fct 50 35 50 ef1010fct 0.98 100 70 100 ef1020fct -55 to +150 -65 to +175 5.0 250 25 200 140 200 10.0 80 3.0 EF1040FCT 400 280 400 1.30 ef1060fct 1.75 600 420 600 unit c c unit ua ua unit c/w ns v v v a a v typical diode junction capacitance (note 1) c j 30 pf ef1005fct ef1010fct ef1020fct EF1040FCT ef1060fct ef1005fct ef1010fct ef1020fct EF1040FCT ef1060fct note 1: reverse recovery time test condition, if=0.5a, ir=1.0a, irr=0.25a note 2: measure at 1 mhz and applied reverse voltage of 4.0 v d.c. ds-222529 2009/08/10 2015/07/06 d 6
page 3 http://www.formosams.com/ tel:886-2-22696661 fax:886-2-22696141 rating and characteristic curves (ef1005fct thru ef1060fct) fig.1-typical forward current derating curve average for ward current ,(a) 2.0 4.0 6.0 8.0 10.0 12.0 fig.4 - typical reverse characteristics reverse leakage current , (ua) case temperature,t ( c) c 0 0 20 40 60 80 100 120 140 160 180 200 percent of rated peak reverse voltage,(%) fig.2-maximum non-repetitive forward surge current 0 40 20 60 100 80 number of cycles at 60hz 110 5 50 100 8.3ms single half sine wave jedec method peak for ward surge current ,(a) document id issued date revised date revision page. (+) (+) 25vdc (approx.) ( ) ( ) pulse generator (note 2) oscilliscope (note 1) 1 non- inductive notes: 1. rise time= 7ns max., input impedance= 1 megohm.22pf. 2. rise time= 10ns max., source impedance= 50 ohms. d.u.t. fig.5- test circuit diagram and reverse recovery time characteristics 10 noninductive 50 noninductive +0.5a 0 -0.25a -1.0a | | | | | | | | 1cm set time base for 50 / 10ns / cm trr t =25 c j 0 20 40 60 80 100 120 140 1000 100 10 1 0.1 t j = 25 c t j = 125 c ds-222529 2009/08/10 2015/07/06 d 6 instantaneous for ward current ,(a) forward voltage,(v) fig.3-typical forward characteristics 40 10 1 . 1 t25 = j 600v 400v 50~200v c .6 .8 1.0 1.2 1.4 1.6 1.8 2.0
marking type number marking code ef1005fct ef1005fct ef1010fct ef1010fct ef1020fct ef1020fct EF1040FCT EF1040FCT ef1060fct ef1060fct page 4 formosa ms http://www.formosams.com/ tel:886-2-22696661 fax:886-2-22696141 document id issued date revised date revision page. pinning information pin1 anode pin2 cathode pin3 anode pin simplified outline symbol 1 2 3 pin 1 pin 3 pin 2 ef1005fct thru ef1060fct effciency fast rectifiers tube packing ito-220ab 50 525*32*7.0 1000 555*150*40 580*230*175 5,000 15.0 package tube tube size box inner box carton size carton approx. gross weight (kg) (pcs) (m/m) (m/m) (pcs) (m/m) (pcs) ds-222529 2009/08/10 2015/07/06 d 6
page 5 formosa ms http://www.formosams.com/ tel:886-2-22696661 fax:886-2-22696141 document id issued date revised date revision page. ef1005fct thru ef1060fct suggested thermal profiles for soldering processes temperature(c) 1.lead free temperature profile wave-soldering 0 20 40 60 80 100 120 140 160 180 200 220 240 time(sec) 0 20 40 60 80 100 120 140 160 180 200 220 240 260 280 preheat max gradient 2oc/s peak max well time 5 max cool down max gradient-4oc/s suggested gradient 2oc/s or less - peak soldering temperature not to exceed 260oc effciency fast rectifiers ds-222529 2009/08/10 2015/07/06 d 6
page 6 formosa ms http://www.formosams.com/ tel:886-2-22696661 fax:886-2-22696141 document id issued date revised date revision page. ef1005fct thru ef1060fct effciency fast rectifiers 1. solder resistance 2. solderability 3. high temperature reverse bias 4. forward operation life 5. intermittent operation life 6. pressure cooker 7. temperature cycling 8. forward surge 9. humidity 10. high temperature storage life at 260 5 for 10 2sec. immerse body into solder 1/16" 1/32" at 245 5 for 5 sec. v =80% rate at t =150 for 168 hrs. rated average rectifier current at t =25 for 500hrs. t = 25 c, i = i on state: power on for 5 min. off state: power off for 5 min. on and off for 500 cycles. 15p at t =121 for 4 hrs. -55 to +125 dwelled for 30 min. and transferred for 5min. total 10 cycles. 8.3ms single half sine-wave , one surge. at t =85 , rh=85% for 1000hrs. at 175 for 1000 hrs. c c c c c cc c c o o o o o oo o o rj a afo sig a a o mil-std-750d method-2031 mil-std-202f method-208 mil-std-750d method-1038 mil-std-750d method-1027 mil-std-750d method-1036 mil-std-750d method-1051 mil-std-750d method-4066-2 mil-std-750d method-1021 mil-std-750d method-1031 jesd22-a102 item test conditions reference high reliability test capabilities ds-222529 2009/08/10 2015/07/06 d 6
|
